How to Frame Walls for a Basement Room
Many people know how to frame walls in their living rooms but find that the same instructions do not work well when they are attempting to frame walls in a basement room. Here, too, the instructions can be a bit complicated and there are special tools that must be used if you are to have success. The first step is to decide where you will want to place the framing edge for the wall. Once this has been established, you need to determine whether your wall will be a parquet or will need to be framed using solid concrete blocks. The type of framing material that you use will depend on what you have available in your basement room. If you are working with a budget, you may want to consult with a professional about the best way to frame your wall.
After this important decision has been made, the next step is to find out what tools you will need to successfully frame walls in a basement. One of the most difficult aspects of this project will be the amount of time that is required to build it. You may find that you need to hire help so that you can complete the job in a timely manner. Your home building plans should include a list of all the materials that you will need to complete the basement remodel. You should also have a list of the tools that you will need to complete this project.
When you start the project, it is important to work in an area where there is power. It is also important to make sure that you have all of the materials that you need handy. This includes the type of framing material that you will need as well as spares such as nails or screws. If you are framing a wall by using drywall tape, you will need a drill and screwdriver. Other tools that you will need include a hammer and tape measure.
The first step in framing a basement room is to install the wall covering material
Most basement rooms are finished with painted drywall tape. You should leave a space of two feet between the ceiling and the wall to set up the frames. You can then nail the frame into place using the correct type of nails that will fit into the space between the drywall and the ceiling.
Once you have the drywall down, you can begin framing the wall. There are many different methods for framing walls. Some people use drywall to create the frame while others use stud wall construction. Creating a frame from two long pieces of wood, called studs, is known as jamb framing.
When you are framing walls for a basement room
It is important to remember that your room will have some sort of moisture in the air. This will cause the frame to rust if it is not sealed properly. You should therefore put the framing behind a door with a double lock. Any drafty windows should be covered with wood or insulation.
The next step in how to frame a basement room is to cover the wall frames with drywall finishing paper. You can either buy this separately or cut it to fit. This finishing paper is great because it helps to seal the wall. It also makes the wall joints stronger. Finishing paper will not work as well if there are flaws in the wall.
The last step in how to frame walls for a basement room involves adding some molding. You should put this at the top and at the bottom of the wall. This molding will help to hide any gaps in the wall. You should also use caulking to fill in any gaps in the wall. You should also sand the wall lightly before you paint it.